FMCE-1528 Datasheet, PDF (3/13 Pages) Interpoint Corporation Company – Attenuation to 70 dB at 500 kHz, typical Transient rating -0.5 to 80 V for 1 second

Crane Aerospace & Electronics Power Solutions
FMCE-1528 EMI Input Filters
28 Volt Input – 15 Amp
Pin Out
PIN OUT
Pin
Designation
1, 2, 3 Positive Input
4, 5, 6 Input Common
7, 8, 9 Output Common
10, 11, 12 Positive Output
Bottom of
case
Case Ground
Notes
1. All pins must be connected.
2. The baseplate is the only case ground connection and
should directly contact chassis ground.
Angled corner and cover marking indicate pin one for cases U and V.
Cover marking indicates pin one for cases W, Y and Z.
TOP VIEW
1
U Case
12
2
11
3 Outline shown is case U, pin out is the same 10
for all cases. See cases U, V, W, Y, and Z
4 _{for dimensions.}
9
5
8
6
7
Figure 3: Pin Out
www.interpoint.com
Page 3 of 13
FMCE-1528 Rev E - 20100615