HR151-1205 Datasheet, PDF (7/9 Pages) Interpoint Corporation Company – DC/DC CONVERTERS 12 & 28 VOLT INPUT

CASE F
CASES
Dot on top of case indicates pin one
CASE F
BOTTOM VIEW
See Figures 20 - 23 for pin configuration
1.350 max
(34.29)
1.950 max
(49.53)
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
Materials
Header Case F1
Cold Rolled Steel/Nickel/Gold
Cases F2 - F4
Cold Rolled Steel/Nickel/Tin
Cover Case F1
Kovar/Nickel
Cases F2 - F4
Cold Rolled Steel/Nickel/Tin
Pins #52 alloy (all cases)
MHV Series Triple – compression glass seal
MTR Series Triple, case F1 – ceramic seal
MTR Series Triple, case F2 – compression glass seal
HUM40 – compression glass seal or ceramic seal
Case F3 – compression glass seal
Case F4 – compression glass seal or ceramic seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.2) for two decimal places
unless otherwise specified
FIGURE 19: CASE F MAXIMUM DIMENSIONS
BOTTOM VIEW CASE F1
MTR Series Triple and MHV Series Triple: Screening – Standard, ES, or 883
Bathtub
Platform
Seam Seal
Dot on top of case indicates pin one
MHV
Series
1.170
(29.72)
1
2
3
4
5
0.040 dia.
(1.02)
MTR
Series
10
9
8
7
6
0.170
(4.32)
0.000
FIGURE 20: CASE F1
Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer
to the numerical dimensions for accuracy.
B8-12