English
Language : 

HR151-1205 Datasheet, PDF (5/9 Pages) Interpoint Corporation Company – DC/DC CONVERTERS 12 & 28 VOLT INPUT
CASES
CASE H
Dot on top of case indicates pin one
CASE H
BOTTOM VIEW
See Figures 29 – 34
for pin configurations.
2.125 max
(53.98)
1.125 max
(28.58)
Materials
Header Cold Rolled Steel/Nickel/Gold
cases H1 and H2
Cold Rolled Steel/Nickel/Tin
cases H3, H4, and H5
Cover Kovar/Nickel
cases H1 and H2
Cold Rolled Steel/Nickel/Tin
cases H3, H4, and H5
Pins #52 alloy
ceramic seal
case H1
case H2 (except MHV Series Single and Dual)
compression glass seal
MHV Series Single and Dual
case H3, H4, H5
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
FIGURE 28: CASE H MAXIMUM DIMENSIONS
BOTTOM VIEW CASE H1
FMC EMI Filter: Screening – Standard, ES, or 883
SFMC EMI Filter: Screening – Space Standard, H, or K
Seam Seal
0.040 dia
(1.02)
1.110 (28.19)
0.955 (24.26)
Squared corner and dot on top
of case indicate pin one.
1
2
3
0.555 (14.1)
5
4
0.155 (3.94)
0.000
FIGURE 29: CASE H1
Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer
to the numerical dimensions for accuracy.
B8-17