FME28-461_10 Datasheet, PDF (4/13 Pages) Interpoint Corporation Company – EMI Input Filters 28 Volt Input – 15 Amp

Crane Aerospace & Electronics Power Solutions
FME28-461 EMI Input Filters
28 Volt Input – 15 Amp
model numbering key
Base Model
Input Voltage
FME 28 - 461 V / 883
MIL-STD-461 Reference
Case/Lead Option*
Screening
(Standard screening has no designator
in this position.)
*Case/Lead Option:
See cases U, V, W, Y, and Z for drawings and dimensions.
DSCC Numbers
DSCC Drawing (5915) FME28 Similar Part
-95004-01HTC
FME28-461W/883
-95004-01HUC
FME28-461V/883
-95004-01HXC
FME28-461/883
-95004-01HYC
FME28-461Y/883
-95004-01HZC
FME28-461Z/883
For exact specifications for a DSCC product, refer to the
DSCC drawing. DSCC drawings can be downloaded
from: http://www.dscc.dla.mil/programs/smcr
Case Options:
DSCC Cross Referenced
to Interpoint
DSCC
Case Option
Interpoint
Case Option
T
W
U
V
X
(standard
case, no option
required)
Y
Y
Z
Z
model selection
On the lines below, enter one selection from under each category
to determine the model number.
Category
FME28
-461
Base Model and MIL-STD-461 Reference
Input Voltage
_______
Case/Lead
option ¹
/
______
Screening ²
U (leave blank)
Standard (leave blank)
“FME28” is the
“-461” is the only
V
Selection
only available
available selection
W
selection
Y
ES
883 (Class H, QML)
Z
Notes:
1. Case U is the standard, side-leaded, flanged case. Leave the option blank for case U. Refer to the case drawings on pages 7 - 11 for other case options.
2. Leave blank for standard screening. Use “ES” for “ES” screening and “883” for Class H screening. See the table on page 13 for more information.
www.interpoint.com
Page 4 of 13
FME28 Rev C - 20100226