English
Language : 

SMHF283R3S_15 Datasheet, PDF (12/15 Pages) Interpoint Corporation Company – SMHF Single and Dual DC-DC Converters
Crane Aerospace & Electronics Power Solutions
SMHF Single and Dual DC-DC Converters
16-45 Volt Input – 15 Watt
BOTTOM VIEW CASE E1
Projection Weld
1.130 max. (28.70)
0.960 (24.38)
0(0.0.7360) dia.
Squared corner and dot on top
of case indicate pin one.
1
2345
0.160 (4.06)
8
0.000
7
6
Weight: 30 grams maximum
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device. Solder pins
individually with heat application not exceeding 300°C for 10 seconds per pin.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
#52 alloy/Gold compression glass seal.
Gold plating of 50 - 150 microinches included in pin diameter
Seal Hole: 0.080 ±0.002 (2.03 ±0.05)
Please refer to the numerical dimensions for accuracy.
Case E1, Rev F, 2013.11F.i1g5ure 27: Case E1
www.craneae.com/interpoint
Page 12 of 15
SMHF Rev AF - 2015.10.28