AN87C196KDF8 Datasheet, PDF (8/21 Pages) Intel Corporation – 16-BIT HIGH PERFORMANCE CHMOS MICROCONTROLLER

AUTOMOTIVE 87C196KD
DC CHARACTERISTICS (Over Specified Operating Conditions)
Symbol
Description
Min Typ Max Units
Test Conditions
I_LI
I_LI1
I_TL
I_IL
I_CC
I_REF
I_IDLE
R_RST
C_S
Input Leakage Current (Std Inputs)
Input Leakage Current (Port 0)
1 to 0 Transition Current (QBD Pins)
Logical 0 Input Current (QBD Pins)
Active Mode Current in Reset
A D Converter Reference Current
g10 mA 0 ^k V_IN ^k V_CC b 0 3V
g3
mA 0 ^k V_IN ^k V_REF
b_{650 mA VIN} e _{2 0V}
b_{70 mA VIN} e _{0 45V}
65 75 mA XTAL1 ^e 16 MHz
2
5
mA ^{VCC e VPP e VREF e 5 5V}
Idle Mode Current
15 30 mA
Reset Pullup Resistor
6K
Pin Capacitance (Any Pin to V_SS)
65K
X V_CC ^e 5 0V V_IN ^e 4 0V
10
pF
NOTES
(Notes apply to all specifications)
1 QBD (Quasi-bidirectional) pins include Port 1 P2 6 and P2 7
2 Standard Outputs include AD0–15 RD WR ALE BHE INST HSO pins PWM P2 5 CLKOUT RESET Ports 3 and 4
TXD P2 0 and RXD (in serial mode 0) The V_OH specification is not valid for RESET Ports 3 and 4 are open-drain outputs
3 Standard Inputs include HSI pins READY BUSWIDTH NMI RXD P2 1 EXTINT P2 2 T2CLK P2 3 and T2RST P2 4
4 Maximum current per pin must be externally limited to the following values if V_OL is held above 0 45V or V_OH is held
below V_CC b 0 7V
I_OL on Output pins 10 mA
I_OH on quasi-bidirectional pins self limiting
I_OH on Standard Output pins 10 mA
5 Maximum current per bus pin (data and control) during normal operation is g3 2 mA
6 During normal (non-transient) conditions the following total current limits apply
Port 1 P2 6
HSO P2 0 RXD RESET
P2 5 P2 7 WR BHE
AD0 – AD15
RD ALE INST–CLKOUT
I_OL 29 mA
I_OL 29 mA
I_OL 13 mA
I_OL 52 mA
I_OL 13 mA
I_OH is self limiting
I_OH 26 mA
I_OH 11 mA
I_OH 52 mA
I_OH 13 mA
8