V23870-A2111-A100 Datasheet, PDF (9/11 Pages) Infineon Technologies AG – Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx

EYE SAFETY
This laser based singlemode transceiver is a Class 1 product. It complies with IEC 60825-1 and FDA 21 CFR
1040.10 and 1040.11. To meet laser safety requirements the transceiver shall be operated within the maximum
operating limits.
Caution
All adjustments have been made at the factory prior to shipment of the devices. No maintenance or
alteration to the device is required.
Tampering with or modifying the performance of the device will result in voided product warranty.
Note: Failure to adhere to the above restrictions could result in a modification that is considered an act of
“manufacturing,” and will require, under law, recertification of the modified product with the U.S. Food and Drug
Administration (ref. 21 CFR 1040.10 (i)).
APPLICATION NOTES
Transceiver Assembly/Soldering
Recommended requirements
• avoid temperatures on fiber and connector above 85°C
• only iron soldering permitted
• single pin or simultaneous pin soldering valid
Type
Iron - soldering
Conditions
Standard
iron tip temp.
solder time
< 400 °C IEC 68 2-20 test Tb, methode 2
< 10 sec
Fiber Optics
9
V23870-A2111/2-xx00 BIDI Pigtail SFF transceiver