V23870-A2111-A100 Datasheet, PDF (5/11 Pages) Infineon Technologies AG – Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx

Receiver
Receiving wavelength center of range⁶
Sensitivity (Average Power)⁷
Saturation (Average Power)
Signal Detect Assert Level⁸
Signal Detect Deassert Level⁹
Signal Detect Hysteresis
Signal Detect Assert Time
Signal Detect Deassert Time
Data Output Differential Voltage¹⁰
Rise/Fall Time
Max Rx Supply Current¹¹
Module Electro-Optical Characteristics
Optical Isolation¹²
Symbol
λ_R
P_IN
P_SAT
P_SDA
P_SDD
P_SDA-
P_SDD
t_ASS
t_DAS
V_DIFF
t_R; t_F
I_RX
Min.
1270
-3.0
-31
0.5
0.4
Typ.
1310
4
0.8
60
Max. Unit
1350 nm
-21 dBm
dBm
-22 dBm
dBm
6 dB
100 µs
350 µs
1.0 V
1.5 ns
130 mA
Symbol Min. Typ.
ORL
14
Max. Unit
dB
6 _{Popt = Pout,max at T=25°C}
7 _{Minimum average optical power at which the BER is less than1x10E–10. Measured with a 10}23 _{–1 NRZ PRBS as recommended by ANSI}
T1E1.2, SONET OC-3, and ITU G.957.
8 _{An increase in optical power above the specified level will cause the SIGNAL DETECT output to switch from a Low state to a High state.}
9 _{A decrease in optical power below the specified level will cause the SIGNAL DETECT to change from a High state to a Low state.}
10 _{AC/AC for data. Load 50Ω to GND or 100Ω differential. For dynamic measurement a tolerance of 50mV should be added.}
11 _{Supply current excluding Rx output load.}
12 _{Source wavelength is 1550 nm, BiDi Tx and Rx is Off}
Fiber Optics
5
V23870-A2111/2-xx00 BIDI Pigtail SFF transceiver