TLE4916-1K Datasheet, PDF (9/16 Pages) Infineon Technologies AG – Low Power Automotive Hall Switch

3
Specification
TLE4916-1K
Specification
3.1
Application Circuit
For operating the sensor a pull-up resistor is required. A ceramic bypass capacitor at Vs to GND is recommended.
Note: The size of the pull-up resistor increases the overall current consumption as additional current is flowing
through this resistor.
Vs
C_S = 100nF
R_Q = 5kΩ
Q
Figure 5 Application Circuit
GND
Datasheet
7
Rev.1.0, 2010-02-23