TLE4916-1K Datasheet, PDF (10/16 Pages) Infineon Technologies AG – Low Power Automotive Hall Switch

3.2
Absolute Maximum Ratings
TLE4916-1K
Specification
Table 2 Absolute Maximum Rating Parameters
Parameter
Symbol
Limit Values Unit
Min.
Max.
Supply voltage
V_S
Supply current
I_S
Output voltage
V_Q
Output current
I_Q
Junction temperature
T_j
-0.3
5.5
V
-1
2.5
mA
-0.3
5.5
V
-1
2
mA
–
125
°C
–
150
195
Magnetic flux density
B
–
unlimited mT
Thermal resistance SC59
100
K/W
Note / Test Condition
for 5000h (not additive)
for 2000h (not additive)
for 3 x 1h (additive)
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
Table 3 ESD Protection¹⁾
Parameter
Symbol
Limit Values Unit Note / Test Condition
Min.
Max.
ESD Voltage
V_ESD
±4
kV HBM, R = 1.5kΩ,
C = 100pF
T_A = 25°C
1) Human Body Model (HBM) tests according to: EOS/ESD Association Standard S5.1-1993 and Mil. Std. 883D method
3015.7
3.3
Operating Range
The following operating conditions must not be exceeded in order to ensure correct operation of the TLE4916-1K.
All parameters specified in the following sections refer to these operating conditions unless otherwise mentioned.
Table 4 Operating Condition Parameters
Parameter
Symbol
Min.
Supply voltage
V_S
2.4
Output voltage
V_Q
-0.3
Junction temperature
T_j
-40
Values
Typ. Max.
2.7 5.0
2.7 5.0
125
Unit
V
V
°C
Note / Test Condition
Datasheet
8
Rev.1.0, 2010-02-23