TLE4699 Datasheet, PDF (9/31 Pages) Infineon Technologies AG – Low Drop Out Linear Voltage Regulator 5 V Fixed Output Voltage

TLE4699
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min. Max.
Voltage Rating
4.1.1
Regulator Input and IC
V_I
Supply I
-42
45
V
–
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
4.1.7
4.1.8
Enable Input EN
Sense Input SI
Regulator Output Q
Sense Output SO
Reset Output RO
Reset Delay D
Reset Switching Threshold
Adjust RADJ
V_EN
V_SI
V_Q
V_WI
V_RO
V_D
V_RADJ
-42
45
-42
45
-1
7
-0.3
7
-0.3
7
-0.3
7
-0.3
7
V
–
V
–
V
–
V
–
V
–
V
–
V
–
Temperatures
4.1.9
Junction Temperature
T_j
-40
150
°C
–
4.1.10
Storage Temperature
T_stg
-55
150
°C
–
ESD Susceptibility
4.1.11
4.1.12
ESD Resistivity
ESD Resistivity
V_ESD
V_ESD
-4
4
kV
-1500 1500 V
HBM ²⁾
CDM ³⁾
1) Not subject to production test, specified by design.
2) ESD susceptibility, Human Body Model “HBM” according to AEC-Q100-002-JESD 22-A114.
3) ESD susceptibility, Charged Device Model “CDM” according to ESDA STM5.3.1.
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
9
Rev. 1.0, 2010-11-30