TLE42794_14 Datasheet, PDF (8/32 Pages) Infineon Technologies AG – Very low Current Consumption

4
General Product Characteristics
TLE42794
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 1 Absolute Maximum Ratings¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition
Number
Min. Typ. Max.
Input, Sense Input
Voltage
V_I
-40 – 45
Output, Reset Output, Sense Output
V–
P_4.1.1
Voltage
V_Q
Reset Delay, Reset Threshold
-0.3 – 7
V–
P_4.1.2
Voltage
Temperature
V_D
-0.3 – 7
V–
P_4.1.3
Junction Temperature
Storage Temperature
ESD Absorption
ESD Absorption
ESD Absorption
T_j
-40 – 150 °C –
T_stg
-50 – 150 °C –
P_4.1.4
P_4.1.5
V_ESD,HBM -2
–2
kV Human Body Model (HBM)²⁾ P_4.1.6
V_ESD,CDM -500 –
500
V
Charge Device Model
(CDM)³⁾
P_4.1.7
ESD Absorption
V_ESD,CDM -750 –
750
V
Charge Device Model
(CDM)³⁾ at corner pins
P_4.1.8
1) not subject to production test, specified by design
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not
designed for continuous repetitive operation.
Data Sheet
8
Rev. 1.2, 2014-07-03