TLD5098EL Datasheet, PDF (8/39 Pages) Infineon Technologies AG – DC/DC Boost, Buck-Boost, SEPIC controller

TLD5098EL
General Product Characteristics
Absolute Maximum Ratings¹⁾
T_j = -40 ⋅C to +150 ⋅C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol
Limit Values Unit Conditions
Min. Max.
4.1.24 Storage Temperature
ESD Susceptibility
T_stg
-55
4.1.25 ESD Resistivity of all Pins
V_ESD,HBM -2
4.1.26 ESD Resistivity of IN, EN/PWMI, FBH, V_ESD,HBM -4
FBL and SET pin to GND
150 °C –
2
kV HBM²⁾
4
kV HBM²⁾
1) Not subject to production test, specified by design.
2) ESD susceptibility, Human Body Model “HBM” according to EIA/JESD 22-A114B
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos. Parameter
4.2.1 Extended Supply Voltage Range
Symbol
V_IN
Limit Values
Min.
Max.
4.5
45¹⁾
4.2.2 Nominal Supply Voltage Range V_IN
8
34
4.2.3 Feedback Voltage Input
V_FBH;
3
60
V_FBL
4.2.4 Junction Temperature
T_j
-40
150
1) Not subject to production test, specified by design.
Unit Conditions
V
V_IVCC > V_IVCC,RTH,d;
Parameter deviations
possible
V
–
V
–
°C –
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Datasheet
8
Rev. 1.0, 2010-10-13