TLE8088EM Datasheet, PDF (7/24 Pages) Infineon Technologies AG – Engine management IC for Small Engines

4
General Product Characteristics
TLE 8088 EM
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; All voltages with respect to ground.
Positive current flowing into pin (unless otherwise specified)
Pos.
Parameter
Symbol
Voltages
4.1.1 Continuous Voltage on pin Vs
4.1.2 Continuous Voltage on pin OUT1
4.1.3 Continuous Voltage on pin OUT2, KIO
V_S
V_OUT1
V_{OUT2, KIO}
4.1.4
IN1, IN2, V5DD, RxD, TxD, ST, NRO,
WDI, WDE
Temperatures
4.1.5 Junction Temperature
4.1.6 Storage Temperature
ESD Susceptibility
4.1.7
ESD Resistivity to GND, Vs, K-LINE,
OUT1,2
4.1.8 ESD Resistivity to GND, other pins
4.1.9
Electro Static Discharge Voltage
“Charged Device Model - CDM”
4.1.10 Electro Static Discharge Voltage
“Charged Device Model - CDM”
V_x
T_j
T_stg
V_ESD
V_ESD
V_ESD
V_ESD
Limit Values
Min.
Max.
-0.3
40
-0.3
30
-0.3
35
-0.3
5.5
-40
150
-55
150
-4
4
-2
2
-500
500
-750
750
1) Not subject to production test, specified by design
2) For outputs no short circuit is allowed
3) ESD susceptibility, HBM according to EIA/JESD 22-A114B (1.5KOhm, 100pF)
4) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101-C
Unit Conditions
V
V IN1=0V
V IN2=0V
TX=V5DD
V
2)
°C –
°C –
kV HBM³⁾
kV HBM³⁾
V All Pins
CDM⁴⁾
V Pin 1, 12, 13,
24 (corner
pins)
CDM⁴⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev 1.0, 2012-10-01