TLE42994V33 Datasheet, PDF (7/25 Pages) Infineon Technologies AG – Low Dropout Fixed Voltage Regulator

4
General Product Characteristics
TLE42994V33
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit
Min.
Max.
Input I, Enable Input EN, Sense Input SI
4.1.1 Voltage
V_I, V_EN, -40
45
V
V_SI
Output Q, Reset Output RO, Sense Output SO
4.1.2 Voltage
Reset Delay D, Reset Threshold RADJ
V_Q, V_RO, -0.3
7
V
V_SO
4.1.3 Voltage
Temperature
V_D, V_RADJ -0.3
7
V
4.1.4 Junction Temperature
4.1.5 Storage Temperature
ESD Absorption
T_j
-40
T_stg
-50
150
°C
150
°C
4.1.6 ESD Absorption
V_ESD,HBM -2
2
kV
4.1.7
V_ESD,CDM -500
500
V
4.1.8
-750
750
V
1) not subject to production test, specified by design
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Conditions
–
–
–
–
–
Human Body
Model (HBM)²⁾
Charge Device
Model (CDM)³⁾
Charge Device
Model (CDM)³⁾ at
corner pins
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.01, 2010-10-14