TLE4284_07 Datasheet, PDF (7/25 Pages) Infineon Technologies AG – Voltage Regulator

TLE 4284
Table 5 Electrical Characteristics TLE 4284 DV (adjustable output voltage)
-40 °C < T_j < 150 °C; V_I - V_Q = 13.5 V, I_Q = 10 mA; unless otherwise specified
Parameter
Sym-
Limit Values Unit Measuring Conditions
bol _{min. typ. max.}
Power Supply Ripple PSRR –
Rejection
65 –
dB V_Q = 10 V, f_r = 120 Hz,
V_r = 0.5 V_PP, C_ADJ = 0 µF ⁵⁾
–
65 –
dB V_Q = 10 V, f_r = 120 Hz,
V_r = 0.5 V_PP, C_ADJ = 10 µF ⁵⁾
1) V_REF = V_Q – V_ADJ
2) Related to V_Q, measured at constant junction Temperature
3) Dropout voltage measured when the output voltage has dropped 100 mV from the nominal value
obtained at V_Q = V_REF.
4) Constant Junction Temperature
5) Not subject to production test - specified by design.
6) Minimum Output Current to maintain regulation
Table 6 Electrical Characteristics TLE 4284 DV15 (1.5 V fixed output voltage)
-40 °C < T_j < 150 °C; V_I = 13.5 V, I_Q = 10 mA; unless otherwise specified
Parameter
Symbol Limit Values Unit Measuring Conditions
min. typ. max.
Output voltage
V_Q
Line regulation
∆V_Q
Load regulation
∆V_Q
Dropout voltage
V_DR
Current consumption I_q
I_q = I_I – I_Q
Temperature stability –
1.45 1.5 1.55 V
– 1.5 – V
– 4.8 22.5 mV
– 2.6 5.2 mV
– 3.1 6.25 mV
– 1.00 1.20 V
– 1.05 1.30 V
– 1.10 1.35 V
– 1.30 1.40 V
– 0.8 1.6 mA
10 mA ≤ I_Q ≤ 1000 mA;
2.9 V ≤ V_I ≤ 16 V
10 mA ≤ I_Q ≤ 1000 mA;
16 V ≤ V_I ≤ 40 V ¹⁾
2.9 V ≤ V_I ≤ 40 V
10 mA ≤ I_Q ≤ 800 mA; ²⁾
V_I = V_Qnom + V_DR
10 mA ≤ I_Q ≤ 1.0 A ²⁾
V_I = V_Qnom + V_DR
I_Q = 100 mA ³⁾
I_Q = 500 mA ³⁾
I_Q = 800 mA ³⁾
I_Q = 1.0 A ³⁾
I_Q = 10 mA
–
8.8 –
mV ⁴⁾
Data Sheet
7
Rev. 2.1, 2007-03-20