TLE4284_07 Datasheet, PDF (11/25 Pages) Infineon Technologies AG – Voltage Regulator

TLE 4284
Table 9 Electrical Characteristics TLE 4284 DV33 (3.3 V fixed output voltage)
-40 °C < T_j < 150 °C; V_I = 13.5 V, I_Q = 10 mA; unless otherwise specified
Parameter
Symbol Limit Values Unit Measuring Conditions
Min. Typ. Max.
Output voltage
V_Q
Line regulation
∆V_Q
Load regulation
∆V_Q
Dropout voltage
V_DR
Current consumption I_q
I_q = I_I - I_Q
Temperature stability –
3.20 3.3 3.40 V
– 3.3 – V
– 15 50 mV
–6
13 mV
–8
16 mV
– 1.00 1.20 V
– 1.05 1.30 V
– 1.10 1.35 V
– 1.30 1.40 V
– 0.8 1.6 mA
10 mA ≤ I_Q ≤ 1000 mA;
4.7 V ≤ V_I ≤ 16 V
10 mA ≤ I_Q ≤ 1000 mA ;
16 V ≤ V_I ≤ 40 V ¹⁾
4.7 V ≤ V_I ≤ 40 V
10 mA ≤ I_Q ≤ 800 mA ²⁾
V_I = V_Qnom + V_DR
10 mA ≤ I_Q ≤ 1.0 A ²⁾
V_I = V_Qnom + V_DR
I_Q = 100 mA ³⁾
I_Q = 500 mA ³⁾
I_Q = 800 mA ³⁾
I_Q = 1.0 A ³⁾
I_Q = 10 mA
–
20 –
mV ⁴⁾
Current limit
I_Qmax
RMS Output Noise –
1000 –
50 200
– 30
2200 mA
– mA
– ppm
V_I – V_Q < 18V;
V_Q = V_nom - 100 mV
V_I = 40 V;
V_Q = V_nom - 100 mV
T_j = 25 °C
ppm of V_Q; T_j = 25 °C;
10 Hz ≤ f ≤ 10 kHz ⁴⁾
Power Supply Ripple PSRR –
Rejection
65 –
dB f_r = 120 Hz; V_r = 0.5 Vpp;
C_ADJ = 0 µF ⁴⁾
–
65 –
dB f_r = 120 Hz; V_r = 0.5 Vpp;
C_ADJ = 10 µF ⁴⁾
1) Device is usable within given range without destruction, but the accuracy of the output voltage can only be
guarantied in the range specified in the line above.
2) Measured at constant junction temperature.
3) Dropout voltage measured when the output voltage has dropped 100 mV from the nominal value.
4) Not subject to production test - specified by design.
Data Sheet
11
Rev. 2.1, 2007-03-20