English
Language : 

TLE4209G Datasheet, PDF (7/15 Pages) Infineon Technologies AG – Automotive Power
◁
TLE4209G
General Product Characteristics
4.3
Thermal Resistance
Note: This thermal data was generated in accordance with JEDEC JESD51 standards. For more information, go
to www.jedec.org.
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
4.3.1
4.3.2
Junction to Soldeering Point1)
Junction to Ambient1)
minimal-footprint
RthJSP
–
RthJA
–
–
25
130 –
K/W measured to pin 5
K/W 2)
4.3.3
Junction to Ambient1)
additional 600 mm2 CU area
RthJA
–
65
–
K/W 3)
1) Not subject to production test, specified by design.
2) JESD 51-2, 51-3, FR4 76.2 mm × 114.3 mm × 1.5 mm, 70 µm Cu, minimal footprint
3) JESD 51-2, 51-3, FR4 76.2 mm × 114.3 mm × 1.5 mm, 70 µm Cu, 600 mm2 CU cooling area connected to Pins: 3, 4, 5,
10, 11, 12
4.4
Electrical Characteristics
Electrical Characteristics
VS = 8 V to 18 V, Tj = -40 °C to +150 °C, IOUT1-2 = 0 A, all voltages with respect to ground, positive current flowing
into pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Current Consumption
4.4.1 Supply current
IS
4.4.2 Supply current
IS
4.4.3 Supply current
IS
Over- and Under Voltage Lockout
–
12
20
mA –
–
20
30
mA IOUT1 = 0.3 A
IOUT2 = -0.3 A
–
30
50
mA IOUT1 = 0.7 A
IOUT2 = -0.7 A
4.4.4 UV Switch ON voltage
VUV ON
–
7.4
8
V
VS increasing
4.4.5 UV Switch OFF voltage
VUV OFF 6.3
6.9
–
V
VS decreasing
4.4.6 UV ON/OFF Hysteresis
VUVHY
–
0.5
–
V
VUV ON - VUV OFF
4.4.7 OV Switch OFF voltage
VOV OFF –
20.5 23
V
VS increasing
4.4.8 OV Switch ON voltage
VOV ON 17.5 20
–
V
VS decreasing
4.4.9 OV ON/OFF Hysteresis
VOVHY
–
0.5
–
V
VOV OFF - VOV ON
Outputs OUT1-2, Saturation Voltages
4.4.10
4.4.11
4.4.12
4.4.13
Source (upper)
IOUT = -0.3 A
Sink (upper)
IOUT = -0.7 A
Sink (lower)
IOUT = 0.3 A
Sink (lower)
IOUT = 0.7 A
VSAT U
–
VSAT U
–
VSAT L
–
VSAT L
–
0.90 1.20 V
1.10 1.50 V
0.25 0.40 V
0.45 0.75 V
Tj = 25 °C
Tj = 25 °C
Tj = 25 °C
Tj = 25 °C
Data Sheet
7
Rev. 1.3, 2008-02-04
 ▷