V23818-K15-B57 Datasheet, PDF (6/18 Pages) Infineon Technologies AG – SFP - Small Form-factor Pluggable Single Mode 1300 nm 1.0625 Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC™ Connector

V23818-K15-B57
Description
A low signal on TxDis enables transmitter. If TxDis is high or not connected the
transmitter is disabled.
The information which kind of SFP module has been plugged into an SFP port can be
read through the MOD-DEF interface. The information is stored in an I²C-EEprom inside
the SFP Transceiver.
Regulatory Compliance
Feature
Standard
ESD:
EIA/JESD22-A114-B
Electrostatic Discharge (MIL-STD 883D
to the Electrical Pins method 3015.7)
Immunity:
Against Electrostatic
Discharge (ESD) to the
Duplex LC Receptacle
EN 61000-4-2
IEC 61000-4-2
Immunity:
Against Radio
Frequency
Electromagnetic Field
EN 61000-4-3
IEC 61000-4-3
Emission:
Electromagnetic
Interference (EMI)
FCC 47 CFR Part 15,
Class B
EN 55022 Class B
CISPR 22
Comments
Class 1C
Discharges ranging from ±2 kV to
±15 kV on the receptacle cause no
damage to transceiver (under
recommended conditions).
With a field strength of 3 V/m, noise
frequency ranges from 10 MHz to
2 GHz. No effect on transceiver
performance between the
specification limits.
Noise frequency range:
30 MHz to 18 GHz
Data Sheet
6
2003-04-25