V23818-K15-B57 Datasheet, PDF (4/18 Pages) Infineon Technologies AG – SFP - Small Form-factor Pluggable Single Mode 1300 nm 1.0625 Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC™ Connector

V23818-K15-B57
Description
Description
The Infineon Fibre Channel / Gigabit Ethernet single mode transceiver – part of Infineon
Small Form Factor transceiver family – is based on the Physical Medium Depend (PMD)
sublayer and baseband medium, type 1000 Base-LX (long wavelength) compliant to
IEEE Std 802.3 and Fibre Channel FC-PI (Rev. 13) 100-SM-LC-L.
The appropriate fiber optic cable is 9 µm single mode fiber with LC™ connector.
Link Length as Defined by IEEE and Fibre Channel Standards
Fiber Type
at 1.0625 Gbit/s
9 µm, SMF
50 µm, 500 MHz*km
min.¹⁾
Reach
typ.
max.²⁾
Unit
2
10,000 meters
0.5
550
62.5 µm, 200 MHz*km
at 1.25 Gbit/s
9 µm, SMF
50 µm, 400/500 MHz*km
62.5 µm, 500 MHz*km
0.5
550
2
5,000 meters
2
550
2
550
1) _{Minimum reach as defined by IEEE and Fibre Channel Standards. A 0 m link length (loop-back connector) is}
supported.
2) _{Maximum reach as defined by IEEE and Fibre Channel Standards. Longer reach possible depending upon link}
implementation.
The Infineon SFP single mode transceiver is a single unit comprised of a transmitter, a
receiver, and an LC™ receptacle.
This transceiver supports the LC™ connectorization concept. It is compatible with RJ-45
style backpanels for high end datacom and telecom applications while providing the
advantages of fiber optic technology.
The module is designed for low cost SAN, LAN, WAN, Fibre Channel and Gigabit
Ethernet applications. It can be used as the network end device interface in mainframes,
workstations, servers, and storage devices, and in a broad range of network devices
such as bridges, routers, hubs, and local and wide area switches.
This transceiver operates at 1.0625 and 1.25 Gbit/s from a single power supply (+3.3 V).
The full differential data inputs and outputs are LVPECL compatible.
Data Sheet
4
2003-04-25