English
Language : 

TLE7274-2 Datasheet, PDF (6/19 Pages) Infineon Technologies AG – 5-V Low Dropout Voltage Regulator
TLE7274-2
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings1)
Tj = -40 °C to 150 °C; all voltages with respect to ground, (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Test Condition
Min.
Max.
Input I
4.1.1 Voltage
Output Q
VI
-0.3
45
V
–
4.1.2 Voltage
4.1.3 Voltage
Temperature
VQ
-0.3
6
V
–
VQ
-0.3
6.2
V
t < 10 s2)
4.1.4 Junction temperature
4.1.5 Storage temperature
ESD Susceptibility
Tj
-40
150
°C –
Tstg
-50
150
°C –
4.1.6
Human Body Model (HBM)3)
Voltage -
3
kV –
4.1.7
Charged Device Model (CDM)4) Voltage
-
1.5
kV –
1) not subject to production test, specified by design
2) exposure to these absolute maximum ratings for extended periods (t > 10 s) may affect device reliability
3) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
4) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos.
Parameter
Symbol
Limit Values Unit Remarks
Min.
Max.
4.2.1 Input voltage
VI
5.5
42
V–
4.2.2
4.2.3
Output Capacitor’s
Requirements
CQ
470
–
ESR(CQ) –
10
nF 1)
Ω
2)
4.2.4 Junction temperature
Tj
-40
150
°C –
1) the minimum output capacitance requirement is applicable for a worst case capacitance tolerance of 30%
2) relevant ESR value at f = 10 kHz
Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the Electrical Characteristics table.
Data Sheet
6
Rev. 1.01, 2011-11-30