TLE4242EJ_15 Datasheet, PDF (6/17 Pages) Infineon Technologies AG – 1 Channel High Side Current Source up to 500mA

Infineon® LITIX™ Linear
TLE4242EJ
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 4-1 Absolute Maximum Ratings¹⁾
T_j = -40°C to +150°C; all voltages with respect to ground, positive current flowing into pin for input pins,
positive currents flowing out of pin for output pins (unless otherwise specified)
Parameter
Symbol
Values
Unit Note or
Number
Min. Typ. Max.
Test Condition
Voltages
Input voltage
Output voltage
Status output voltage
Status delay voltage
Reference input voltage
V_I
V_Q
V_ST
V_D
VREF
-42 –
-1
–
-0.3 –
-0.3 –
-1
–
45
V
–
40
V
–
40
V
–
7
V–
16
V
–
P_4.1.1
P_4.1.2
P_4.1.3
P_4.1.4
P_4.1.5
PWM input voltage
VPWM
-40 –
40
V
–
P_4.1.6
Currents
Input current
I_I
Output current
I_Q
Status output current
I_ST
Status delay current
I_D
–
–
–
A internally limited P_4.1.7
–
–
–
A internally limited P_4.1.8
-5
–
5
mA –
P_4.1.9
-1
–
1
mA in off-state
P_4.1.17
10 min
Reference input current
I_REF
PWM input current
I_PWM
Temperatures
-2
–
2
mA –
-1
–
1
mA –
P_4.1.10
P_4.1.11
Junction Temperature
T_j
Storage Temperature
T_stg
ESD Susceptibility
-40 –
-55 –
ESD Susceptibility
V_ESD
-2
–
ESD Susceptibility
V_ESD
-500 –
ESD Susceptibility Pin 1, 4, 5, 8 V_ESD1,4,5,8 -750 –
(corner pins) to GND
150 °C –
150 °C –
2
kV HBM²⁾
500 V
CDM³⁾
750 V
CDM³⁾
P_4.1.12
P_4.1.13
P_4.1.14
P_4.1.15
P_4.1.16
1) Not subject to production test, specified by design.
2) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS001 (1.5k Ω, 100 pF)
3) ESD susceptibility, Charged Device Model “CDM” ESDA STM5.3.1 or ANSI/ESD S.5.3.1
Data Sheet
6
Revision 1.0
2015-03-13