BGM15LA12 Datasheet, PDF (6/24 Pages) Infineon Technologies AG – Low-Band LNA Multiplexer Module

BGM15LA12 Low-Band LNA Multiplexer Module
1 Features
• Power gain: 17.5 dB
• Low noise figure: 1.1 dB
• Low current consumption: 4.9 mA
• Frequency range from 0.7 to 1.0 GHz
• RF output internally matched to 50 Ω
• Low external component count
• High port-to-port-isolation
• Suitable for LTE / LTE-Advanced and 3G applications
• No decoupling capacitors required if no DC applied on RF lines
• On chip control logic including ESD protection
• Supply voltage: 2.2 to 3.3 V
• Integrated MIPI RFFE interface operating in 1.1 to 1.95 V voltage
range
• Software programmable MIPI RFFE USID
• Small form factor 1.1 mm x 1.9 mm
• High EMI robustness
• RoHS and WEEE compliant package
BGM15LA12
2 Product Description
The BGM15LA12 is a LNA multiplexer module for LTE low-band frequencies that increases the data rate while
keeping flexibility and low footprint. It is a perfect solution for multimode handsets based on LTE-Advanced and
WCDMA. The BGM15LA12 is controlled via a MIPI RFFE controller. The device configuration is shown in Fig. 12.
Table 1: Ordering Information
Type
BGM15LA12
Package
ATSLP-12-1
Data Sheet
6
Marking
L1
Revision 3.0 - 2015-07-24