TLE4253 Datasheet, PDF (5/22 Pages) Infineon Technologies AG – Low Dropout Voltage Tracking Regulator

TLE4253
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground (unless otherwise specified).
Pos.
Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Voltages
4.1.1 Input voltage
4.1.2 Output voltage
4.1.3 Adjust / Enable Input
4.1.4 Feedback Input
Temperature
V_I
-42
45
V_Q
-2
45
V_ADJ/EN
-42
45
V_FB
-42
45
V–
V–
V–
V–
4.1.5 Junction Temperature
4.1.6 Storage Temperature
ESD Rating
T_j
-40
T_stg
-50
150
°C –
150
°C –
4.1.7
4.1.8
ESD Susceptibility
V_ESD,HBM -4
4
V_ESD,CDM -1
1
kV HBM²⁾
kV CDM³⁾
1) Not subject to production test, specified by design.
2) ESD susceptibility Human Body Model “HBM” according to EIA/JESD 22-A 114B.
3) ESD susceptibility Charged Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1.
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
5
Rev. 1.2, 2009-11-09