XC164GM_07 Datasheet, PDF (49/69 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core

XC164GM
Derivatives
Electrical Parameters
4
Electrical Parameters
The operating range for the XC164GM is defined by its electrical parameters. For proper
operation the indicated limitations must be respected when designing a system.
4.1
General Parameters
These parameters are valid for all subsequent descriptions, unless otherwise noted.
Table 9
Absolute Maximum Ratings
Parameter
Symbol
Limit Values
Unit Notes
Storage temperature
Junction temperature
Voltage on V_DDI pins with
respect to ground (V_SS)
Voltage on V_DDP pins with
respect to ground (V_SS)
Voltage on any pin with
respect to ground (V_SS)
Input current on any pin
during overload condition
T_ST
T_J
V_DDI
V_DDP
V_IN
–
Min.
-65
-40
-0.5
-0.5
-0.5
-10
Max.
150
150
3.25
°C
1)
°C
Under bias
V
–
6.2
V
–
V_DDP +
V
2)
0.5
10
mA –
Absolute sum of all input –
–
currents during overload
condition
|100|
mA –
1) Moisture Sensitivity Level (MSL) 3, conforming to Jedec J-STD-020C for 260 °C.
2) Input pin XTAL1 belongs to the core voltage domain. Therefore, input voltages must be within the range
defined for VDDI.
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DDP or V_IN < V_SS) the
voltage on V_DDP pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
47
V1.2, 2007-03