V23848-H18-C56 Datasheet, PDF (4/30 Pages) Infineon Technologies AG – iSFP-Intelligent Small Form-factor Pluggable SONET OC-12/OC-3 IR-1 / SDH STM S-4.1/S-1.1 Multirate Applications up to 622 Mbit/s

V23848-H18-C56
V23848-H19-C56
Description
Description
The Infineon OC-12 transceiver – part of Infineon iSFP™ family – is compatible to the
Physical Medium Depend (PMD) sublayer and baseband medium compatible to SONET
OC-12/OC-3 IR-1 (Telcordia GR-253-CORE) and SDH STM-4 S-4.1/S-1.1 (ITU-T
G.957).
The appropriate fiber optic cable is 9 µm single mode fiber with LC™ connector.
Supported Link Lengths
Category within Standard
Reach
min.
max.¹⁾
Unit
SDH STM-4 S-4.1
0
15,000 meters
SONET OC-12 IR-1
0
21,000
1) _{Maximum reach over fiber type SM-G.652 as defined by ITU-T G.957 and Telcordia GR-253-CORE standards.}
Longer reach possible depending upon link implementation.
The Infineon iSFP™ single mode transceiver is a single unit comprised of a transmitter,
a receiver, and an LC™ receptacle.
This transceiver supports the LC™ connectorization concept. It is compatible with RJ-45
style backpanels for high end datacom and telecom applications while providing the
advantages of fiber optic technology.
The Infineon single mode OC-12 transceiver is a single unit comprised of a transmitter,
a receiver, and an LC receptacle. This design frees the customer from many alignment
and PC board layout concerns. The module is designed for low cost LAN and
applications with datarates from 125 to 622 Mbit/s. It can be used as the network end
device interface in workstations, servers, and storage devices, and in a broad range of
network devices such as bridges, routers, and intelligent hubs, as well as local and wide
area ATM switches.
This transceiver operates at up to OC-12 datarates from a single power supply (+3.3 V).
The 100 Ω differential data inputs and outputs are LVPECL and CML compatible.
Data Sheet
4
2004-06-25