TLE4252G Datasheet, PDF (4/12 Pages) Infineon Technologies AG – Low Dropout Tracking Regulator 250 mA output current capability

TLE 4252 G
Table 2
Absolute Maximum Ratings
Parameter
Symbol
Limit Values Unit Remarks
Min. Max.
Supply Voltage Input I
Voltage
V_I
Current
I_I
Enable Input EN
-42
45
–
–
V
–
A
Limited internally ¹⁾
Voltage
V_EN
Current
I_EN
Adjust Input ADJ
-42
45
–
–
V
–
A
Limited internally
Voltage
Current
Output Q
V_ADJ
I_ADJ
-42
45
–
–
V
–
A
Limited internally
Voltage
V_Q
Current
I_Q
Temperature
-2
45
V
–
–
–
A
Limited internally
Junction temperature T_j
Storage temperature T_stg
ESD-Protection
-40
150
°C –
-50
150
°C –
Voltage
V_ESD
-2
2
kV Human Body Model
(HBM)
1) For reverse current flowing in case of negative supply voltage, see table “Electrical Characteristics” on
Page 6. A reverse current may heat up the device. The integrated temperature protection is not operating at
negative supply voltage.
Note: Stresses above the ones listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault
conditions described in the data sheet. Fault conditions are considered as
“outside” normal operating range. Protection functions are not designed for
continuous repetitive operation
.
Data Sheet
4
Rev. 1.0, 2008-05-09