TLE4252G Datasheet, PDF (1/12 Pages) Infineon Technologies AG – Low Dropout Tracking Regulator 250 mA output current capability

Low Dropout Tracking Regulator
TLE 4252 G
Features
• Output tracking tolerance to reference ≤ ±0.2%
• Output voltage adjust down to 1.5 V
• 250 mA output current capability
• Enable function
• Very low current consumption in OFF mode
• Wide operation range: up to 40 V
• Wide temperature range: -40 °C ≤ T_j ≤ 150 °C
• Output protected against short circuit
to GND and Battery
• Overtemperature protection
• Reverse polarity proof
• Green Product (RoHS compliant)
• AEC Qualified
Short Functional Description
The TLE 4252 is a monolithic integrated low-dropout voltage tracking regulator in a
PG-TO263-5 package. It is designed to supply off-board systems, e.g. sensors in engine
management systems under the severe conditions of automotive applications.
Therefore, the device is equipped with additional protection functions against reverse
polarity and short circuit to GND and battery.
With supply voltages up to 40 V, the output voltage follows a reference voltage with high
accuracy. The reference voltage can be applied directly to the adjust input or by an
external resistor divider. The minimum reference voltage at the component’s pin is 1.5 V.
The output is able to drive loads up to 250 mA following e.g. the 5 V output of a main
voltage regulator as reference.
The TLE 4252 tracking regulator can be switched into stand-by mode to reduce the
current consumption to less than 2µA. This feature makes the IC suitable for low power
battery applications.
This product is also available in a PG-TO252-5 package. See datasheet “TLE 4252 D”.
Type
TLE 4252 G
Data Sheet
Package
PG-TO263-5
1
Marking
TLE4252G
Rev. 1.0, 2008-05-09