SBL52414X Datasheet, PDF (4/4 Pages) Infineon Technologies AG – BIDI Optical Standard Module 1310 nm Emitting, 1550 nm Receiving

EYE SAFETY
Ensure to avoid exposure of human eyes to high power laser
diode emitted laser beams. Especially do not look directly into
the laser diode or the collimated laser beam when the diode is
activated.
CLASS 3B LASER PRODUCT according to IEC 60825-1
Required Labels
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
Class 3B Laser Product
CONNECTOR OPTIONS
Model
SBL52414G
SBL51414G
SBL52414N
SBL51414N
SBL52414Z
SBL51414Z
Type
SM FC/PC
SM SC/PC 0°
SM without connector
Class IIIb LASER PRODUCT according to FDA Regulations
complies with 21 CFR 1040.10 and 1040.11
Required Label
LASER RADIATION - AVOID
DIRECT EXPOSURE TO BEAM
SEMICONDUCTOR LASER
INVISIBLE RADIATION
CLASS IIIb LASER PRODUCT
Laser Data
Wavelength
Maximum total output power
Beam divergence (1/e²)
1310 nm
less than 50 mW
10°
Published by Infineon Technologies AG
© Infineon Technologies AG 2002
All Rights Reserved
Attention please!
The information herein is given to describe certain components and shall not be
considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties
of non-infringement, regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices
please contact the Infineon Technologies offices or our Infineon Technologies
Representatives worldwide - see our webpage at
www.infineon.com/fiberoptics
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your Infineon Technologies
offices.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that
life-support device or system, or to affect the safety or effectiveness of that device
or system. Life support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or protect human life.
If they fail, it is reasonable to assume that the health of the user or other persons
may be endangered.
Infineon Technologies AG • Fiber Optics • Wernerwerkdamm 16 • Berlin D-13623, Germany
Infineon Technologies, Inc. • Fiber Optics • 1730 North First Street • San Jose, CA 95112, USA
Infineon Technologies K.K. • Fiber Optics • Takanawa Park Tower • 20-14, Higashi-Gotanda, 3-chome, Shinagawa-ku • Tokyo 141, Japan