SBL52414X Datasheet, PDF (1/4 Pages) Infineon Technologies AG – BIDI Optical Standard Module 1310 nm Emitting, 1550 nm Receiving

Dimensions in mm
LOW POWER SBL52414x
BIDI® Optical Standard Module
1310 nm Emitting, 1550 nm Receiving
connector type
1) 1mm above TO-bottom
FEATURES
• Designed for application in passive-optical networks
• Integrated Wavelength Division Multiplexer (WDM)
• Bi-Directional Transmission in 2nd and 3rd optical
window
• Single fiber solution
• FP-Laser Diode with Multi-Quantum Well structure
• Class 3B Laser Product
• Suitable for bit rates up to 1.25 Gbit/s
• Ternary Photodiode at rear mirror for monitoring and
control of radiant power
• Low noise / high bandwidth PIN diode
• Hermetically sealed subcomponents, similar to TO 46
• With singlemode fiber pigtail
Absolute Maximum Ratings
Module
Operating temperature range at case, T_C............ –40°C to 85°C
Storage temperature range, T_stg ......................... –40°C to 85°C
Soldering temperature t_max=10 s,
2 mm distance from bottom edge of case, T_S...............260°C
Laser Diode
Direct forward current, I_{F max} ......................................... 120 mA
Radiant power CW, P_{F, rad}.................................................1 mW
Reverse Voltage, V_R............................................................... 2 V
Monitor Diode
Reverse Voltage, V_R..............................................................10 V
Forward Current, I_F.............................................................2 mA
Receiver Diode
Reverse Voltage, V_R..............................................................10 V
Forward Current, I_F ............................................................2 mA
Optical power into the optical port, P_port ....................... 1.5 mW
Fiber Optics
BIDI® is a registered trademark of Infineon Technologies
MAY 2002