ICE3AR2280VJZ Datasheet, PDF (30/43 Pages) Infineon Technologies AG – Of f -Line SMPS Cur rent Mode Cont rol ler wi th integrated 800V

CoolSET™ F3R80
ICE3AR2280VJZ
Electrical Characteristics
4
Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 8). The voltage levels are valid if other ratings
are not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction of
the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7
(VCC) is discharged before assembling the application circuit. T_a=25^°C unless otherwise specified.
Parameter
Symbol
Limit Values
Unit
Remarks
min. max.
Drain Source Voltage
Pulse drain current, t_p limited by Tjmax
Avalanche energy, repetitive tAR limited
by max. T_j=150°C¹⁾
Avalanche current, repetitive tAR limited
by max. Tj=150°C
V_DS
I_{D_Puls}
E_AR
I_AR
-
800
V
-
4.9
A
-
0.047 mJ
-
1.5
A
VCC Supply Voltage
V_VCC
-0.3
27
V
FBB Voltage
V_FBB
-0.3
5.5
V
BV Voltage
V_BV
-0.3
5.5
V
CS Voltage
Junction Temperature
Storage Temperature
V_CS
-0.3
5.5
V
T_j
-40
150
°_{C Controller & CoolMOS™}
T_S
-55
150
°_C
Thermal Resistance
Junction -Ambient
R_thJA
-
96
K/W
Soldering temperature,
wavesoldering only allowed at leads
T_sold
-
260
°_{C 1.6mm (0.063in.) from}
case for 10s
ESD Capability (incl. Drain Pin)
V_ESD
-
2
kV Human body model²⁾
1) Repetitive avalanche causes additional power losses that can be calculated as P_AV=E_AR*f
2) According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5KΩ series resistor)
Data Sheet
30
V2.1, 2013-10-22