V23839-R35-L55 Datasheet, PDF (3/34 Pages) Infineon Technologies AG – iSFF - Intelligent Small Form Factor 1.25 Gigabit Ethernet 4.25/2.125/1.0625 Gbit/s Fibre Channel Multimode 850 nm Transceiver with LC™ Connector

V23839-R3x-L55
Pin Configuration
Pin Description
Pin No.
1
2
3
4
5
6
7
8
9
10
A
B
C
D
MS
HL
Name
V_EER
V_CCR
SD
RD–
RD+
V_CCT
V_EET
TxDis
TD+
TD–
SDA
SCL
Rate Select⁶⁾
Tx Fault
MS
HL
Logic Level
N/A
N/A
LVTTL
LVPECL
LVPECL
N/A
N/A
LVTTL
LVPECL
LVPECL
LVTTL
LVTTL
LVTTL
LVTTL
N/A
N/A
Function
Receiver Ground
Receiver Power
Signal Detect^{1) 5)}
Inv. Received Data Out²⁾
Received Data Out²⁾
Transmitter Power
Transmitter Ground
Transmitter Disable³⁾
Transmit Data In⁴⁾
Inv. Transmit Data In⁴⁾
2-wire Data Interface⁵⁾
2-wire Clock Interface⁵⁾
1 & 2 or 2 & 4 Gbit/s⁷⁾
Transmitter Fault⁵⁾
Mounting Studs⁸⁾
Housing Leads⁹⁾
1) _{Normal operation: Logic 1 output, represents that light is present at receiver input.}
Fault condition: Logic 0 output.
2) _{AC coupled inside transceiver. Must be terminated with 100 Ω differential at the user SERDES.}
3) _{A logic 0 switches the transmitter on. A logic 1 switches the transmitter off.}
4) _{AC coupled and 100 Ω differential termination inside the transceiver.}
5) _{Should be pulled up on host board to VCC by 4.7 - 10 kΩ.}
6) _{Not implemented.}
7) _{In accordance to SFF Committee SFF-8079 Draft.}
8) _{Mounting Studs are provided for transceiver mechanical attachment to the circuit board. They also provide an}
optional connection of the transceiver to the equipment chassis ground.
9) _{The transceiver Housing Leads are provided for additional signal grounding. The holes in the circuit board must}
be included and be tied to signal ground (see EMI Recommendations).
Preliminary Product Information
3
2004-06-25