|
V23839-R35-L55 Datasheet, PDF (14/34 Pages) Infineon Technologies AG – iSFF - Intelligent Small Form Factor 1.25 Gigabit Ethernet 4.25/2.125/1.0625 Gbit/s Fibre Channel Multimode 850 nm Transceiver with LC™ Connector | |||
|
◁ |
V23839-R3x-L55
Technical Data
Optical Characteristics (VCC = 2.97 V to 3.63 V, TC = â20°C to 85°C) (contâd)
Parameter
Symbol
Values
Unit
min.
typ.
max.
Stressed Receiver Sensitivity
62.5 µm Fiber9)
@ 4.25 Gbit/s
@ 2.125 Gbit/s
@ 1.0625 Gbit/s
@ 1.25 Gbit/s10)
SPIN
62.5 µm
148
109
67
â12.5
µW
µW
µW
dBm
SD Assert Level11)
SD Deassert Level11)
SD Hysteresis11)
Input Center Wavelength
Optical Return Loss
PSDA
â23
dBm
PSDD
â30
dBm
PSDA
1
dB
âPSDD
λC
770
850
860
nm
ORL
12
dB
1) Fibre Channel PI Standard. Typical OMA values based on â6 dBm launched power (average) and 15 dB
extinction ratio.
2) Into multimode fiber, 62.5 µm or 50 µm diameter.
3) For GbE applications only.
4) Jitter (pk-pk) is measured using a 27â1 NRZ PRBS and a Digital Communications Analyzer.
5) Measured at nominal data rate. These are unfiltered 20% - 80% values.
6) Receiver characteristics are measured with a worst case reference laser.
7) Fibre Channel PI Standard.
8) Average optical power at which the BER is 1x10â12. Measured with a 27â1 NRZ PRBS and ER = 9 dB.
9) Measured at the given Stressed Receiver Eye Closure Penalty and DCD component given in Fibre Channel
PI Standard (2.03/2.18 dB & 40/80 ps).
10) Measured with a transmit signal having a 9 dB extinction ratio.
11) See Figure 4.
Preliminary Product Information
14
2004-06-25
|
▷ |