English
Language : 

TLE7259-2GU Datasheet, PDF (3/31 Pages) Infineon Technologies AG – LIN Transceiver
LIN Transceiver
TLE7259-2GU
1
Overview
Features
• Single-wire transceiver, pin compatible to the TLE7259-2GE
• Transmission rate up to 10.4 kBaud
• Compliant to LIN specification 1.3, 2.0, 2.1 and SAE J2602
• Very high ESD robustness, +/- 8 kV according to IEC61000-4-2
• Very low Electro Magnetic Emission (EME)
• Very high Electro Magnetic Immunity (EMI)
• Very low current consumption in sleep mode
• Very low current consumption in sleep mode with Wake-Up functions
• Wake-Up source detection
• Very low leakage current on the BUS output
• Digital I/O levels compatible for 3.3 V and 5 V microcontrollers
• Suitable for 12 V and 24 V board net
• Bus short to VBAT protection and Bus short to GND handling
• Over temperature protection and Under voltage detection
• Flash mode
• Green Product (RoHs compliant)
• AEC Qualified
PG-DSO-8
Description
The TLE7259-2GU is a follow-up product of the TLE7259-2GE. It provides the same functions and it is pin
compatible to the TLE7259-2GE. The TLE7259-2GU is designed for in-vehicle networks using data transmission
rates from 2.4 kBaud to 10.4 kBaud according to the SAE J2602 standard. The TLE7259-2GU functions as a bus
driver between the protocol controller and the physical bus inside the LIN network. Compliant to all LIN standards
and with a wide operational supply range the TLE7259-2GU can be used in all automotive applications.
Different operation modes and the INH output allow the TLE7259-2GU to control external components, like voltage
regulators. In Sleep-mode the TLE7259-2GU draws less than 8 µA of quiescent current, while still being able to
wake up off of LIN bus traffic and a local Wake-Up input. The very low leakage current on the BUS pin makes the
TLE7259-2GU especially suitable for partially supplied networks and supports the low quiescent current
requirements of the LIN network.
Based on the Infineon Smart Power Technology SPT®, the TLE7259-2GU provides excellent ESD Robustness
together with a very high electromagnetic immunity (EMI). The TLE7259-2GU reaches a very low level of
electromagnetic emission (EME) within a broad frequency range and independent form the battery voltage.
The Infineon Smart Power Technology SPT® allows bipolar and CMOS control circuitry in accordance with DMOS
power devices existing on the same monolithic circuit. The TLE7259-2GU and the Infineon SPT® technology are
AEC qualified and tailored to withstand the harsh condition of the Automotive Environment.
Type
TLE7259-2GU
Data Sheet
Package
PG-DSO-8
3
Marking
7259-2GU
Rev. 1.1, 2008-07-14