TLE4275V33_15 Datasheet, PDF (3/12 Pages) Infineon Technologies AG – Stable with ceramic output capacitor

TLE 4275 V33
2
Electrical Characteristics
Electrical Characteristics
2.1
Absolute Maximum Ratings
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Regulator Input and IC Supply I
2.1.1 Voltage
2.1.2 Current
Regulator Output Q
V_I
-42
45
V–
I_I
–
–
mA internally limited
2.1.3 Voltage
2.1.4 Current
Reset Output RO
V_Q
-1
I_Q
–
16
V–
–
mA internally limited
2.1.5 Voltage
2.1.6 Current
Reset Delay Timing D
V_RO
-0.3
25
I_RO
-5
5
V–
mA
2.1.7 Voltage
2.1.8 Current
Ground GND
V_D
-0.3
7
I_D
-2
2
V–
mA
2.1.9 Current
Temperatures
I_GND
–
–
mA internally limited
2.1.10 Junction Temperature
2.1.11 Storage Temperature
ESD Susceptibility
2.1.12 ESD Resistivity
2.1.13
Moisture Level
T_j
-40
150
T_stg
-50
150
V_ESD,HBM
V_ESD,CDM
-4
-500
4
500
°C –
°C –
kV HBM¹⁾
V
CDM²⁾
2.1.14 Moisture Level
MSL
1
–
–
1) ESD susceptibility, Human Body Model “HBM” according to EIA/JESD 22-A114B.
2) ESD susceptibility, Charged Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Datasheet
3
Rev. 1.1, 2015-01-15