|
TLD2326EL_15 Datasheet, PDF (3/30 Pages) Infineon Technologies AG – 3 Channel High Side Current Source | |||
|
◁ |
3 Channel High Side Current Source
LITIXTM Basic
TLD2326EL
1
Overview
Features
⢠3 Channel device with integrated output stages (current sources),
optimized to drive LEDs
⢠Output current up to 120mA per channel
⢠Low current consumption in sleep mode
⢠PWM-operation supported via VS- and EN-pin
⢠Output current adjustable via external low power resistor and
possibility to connect PTC resistor for LED protection during over
temperature conditions
⢠Dynamic overhead control
⢠Reverse polarity protection
⢠Overload protection
⢠Undervoltage detection
⢠Open load and short circuit to GND diagnosis
⢠Wide temperature range: -40 °C < Tj < 150 °C
⢠PG-SSOP14 package with exposed heatslug
⢠Green Product (RoHS compliant)
⢠AEC Qualified
PG-SSOP14
Description
The LITIXTM Basic TLD2326EL is a three channel high side driver IC with integrated output stages. It is designed
to control LEDs with a current up to 120 mA. In typical automotive applications the device is capable to drive i.e.
3 red LEDs per chain (total 9 LEDs) with a current up to 60mA, which is limited by thermal cooling aspects. The
output current is controlled practically independent of load and supply voltage changes.
Table 1 Product Summary
Operating voltage
Maximum voltage
Nominal output (load) current
Maximum output (load) current
VS(nom)
VS(max)
VOUTx(max)
IOUTx(nom)
IOUTx(max)
5.5 V⦠40 V
40 V
60 mA when using a supply voltage range of 8V
- 18V (e.g. Automotive car battery). Currents up
to IOUT(max) possible in applications with low
thermal resistance RthJA
120 mA; depending on thermal resistance RthJA
Type
TLD2326EL
Data Sheet
Package
PG-SSOP14
3
Marking
TLD2326EL
Rev. 1.1, 2015-03-24
|
▷ |