TLE4998C3C Datasheet, PDF (22/42 Pages) Infineon Technologies AG – Programmable Linear Hall Sensor

TLE4998C3C
Signal Processing
6.5
Clamping
The clamping function is useful for separating the output range into an operating range
and error ranges. If the magnetic field is exceeding the selected measurement range, the
output value OUT is limited to the clamping values. Any value in the error range is
interpreted as an error by the sensor counterpart.
Table 12 Clamping
Parameter
Symbol Limit Values Unit
min. max.
Register size
CL,CH
2x6
bit
Clamping value low
Clamping value high
Clamping quantization
steps
OUT_CL
OUT_CH
∆OUT_Cx
0
64512
1023 65535
1024
LSB₁₆
LSB₁₆
LSB₁₆
1) _{For CL = 0 and CH = 63 the clamping function is disabled}
2) _{OUTCL < OUTCH mandatory}
3) _{Quantization starts for CL at 0 LSB16 and for CH at 65535 LSB16}
Notes
(0...63)
1)
1) 2)
3)
The clamping values are calculated by:
Clamping value low (deactivated if CL=0):
OUT_CL = CL ⋅ 64 ⋅ 16
Clamping value high (deactivated if CH=63):
OUT_CH = (CH + 1) ⋅ 64 ⋅ 16 – 1
Data Sheet
22
Rev 1.1, 2009-09