1ED020I12-F2 Datasheet, PDF (21/28 Pages) Infineon Technologies AG – Single IGBT Driver IC

5.4.5 Short Circuit Clamping
EiceDRIVER™
1ED020I12-F2
Electrical ParametersElectrical Characteristics
Table 9 Short Circuit Clamping
Parameter
Symbol
Min.
Clamping voltage (OUT) V_CLPout
–
(V_OUT - V_VCC2)
Clamping voltage
V_CLPclamp –
(CLAMP) (V_VCLAMP-V_VCC2)
Clamping voltage
(CLAMP)
V_CLPclamp –
Values
Typ.
0.8
Max.
1.3
1.3
–
0.7
1.1
Unit
V
V
V
Note /
Test Condition
IN+ = High,
IN- = Low,
OUT = High
I_OUT = 500 mA
pulse test,
t_CLPmax = 10 μs)
IN+ = High, IN- =
Low,
OUT = High
I_CLAMP = 500 mA
(pulse test,
t_CLPmax = 10 μs)
IN+ = High, IN- =
Low,
OUT = High
I_CLAMP = 20 mA
5.4.6 Dynamic Characteristics
Dynamic characteristics are measured with V_VCC1 = 5 V, V_VCC2 = 15 V and V_VEE2 = -8 V.
Table 10 Dynamic Characteristics
Parameter
Symbol
Min.
Input IN to output propa- T_PDON
145
gation delay ON
Input IN to output propa- T_PDOFF
145
gation delay OFF
Input IN to output propa- T_PDISTO -35
gation delay distortion
(T_PDOFF - T_PDON)
IN input to output
T_PDONt
–
propagation delay ON
variation due to temp
IN input to output
T_PDONt
–
propagation delay OFF
variation due to temp
IN input to output
propagation delay
T_PDISTOt
–
distortion variation due to
temp (T_PDOFF-T_PDON)
Values
Typ.
170
Max.
195
165
190
-5
25
–
25
–
35
–
20
Unit
ns
ns
Note /
Test Condition
C_LOAD = 100 pF
V_IN+ = 50%,
V_OUT=50% @ 25°C
ns
ns
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
μs
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
ns
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
Final Data Sheet
21
Rev. 2.0, 2011-08-01