|
TLE7184F Datasheet, PDF (20/35 Pages) Infineon Technologies AG – System IC for B6 motor drives | |||
|
◁ |
TLE7184F
Interface, VDH Switch and INH Digital Output
8.4
Electrical Characteristics
Electrical Characteristics - Protection and diagnostic functions
VS = 6.0 to 20V, Tj = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Interface - static parameters
8.4.1 IFMA input voltage high level
VIMHL
59
â
â
%
of VVS; IC not in
(for IFµC high)
Sleep Mode
8.4.2 IFMA input voltage low level
(for IFµC low)
VIMLL
â
â
46
%
of VVS; IC not in
Sleep Mode;
8.4.3 IFMA input hysteresis
(for IFµC)
VIMhy
0.5
â
9
%
of VVS; IC not in
Sleep Mode
8.4.4 IFMA wake up voltage high level VIMWH 2
â
4
V
valid in Sleep Mode
= VS-VIFMA
8.4.5 IFMA internal pull-up resistor to VS RIMu
210 340 495 k⦠â
8.4.6
IFMA internal pull-down resistor to RIMd
GND
420 700 980 k⦠not active in Sleep
Mode
8.4.7 Matching of internal pull-up / pull- RIMu/RIMd -5
â
down resistor1)
+5
%
â
8.4.8 IFµC output low voltage
VIuLL
â
â
8.4.9 IFµC internal pull-up resistor to VDD RIu
10
â
Interface - dynamic parameters
0.5
V
no external load
20
k⦠â
8.4.10 IFµC duty cycle
dIu
0
â
100 %
â
8.4.11 Propagation time rising edge IFµC tPRE
â
â
6
µs
Including rising time
to 80% of VVDD;
Cload=100pF
8.4.12 Propagation time falling edge IFµC tPFE
â
â
5
µs
Including falling
time to 20% of
VVDD; Cload=100pF
8.4.13 Deviation between rising and falling tPD
â
â
4
µs
Cload=100pF
IFµC
VDH switch
8.4.14 Ron VDH switch
INHD digital output
RVDH
â
â
150 â¦
Load current = 1mA
8.4.15 Low level input voltage INH
(for INHD=low)
VINHDL
â
â
1.5
V
â
8.4.16 High level input voltage INH
(for INHD=high)
VINHDH
2.1
â
8.4.17 Input hysteresis of INH for INHD1) dVINHD
100
â
8.4.18 INHD low level output voltage
VINHD
â
â
8.4.19 INHD Internal pull-up resistor to RINHD
50
â
VDD
1) Not subject to production test; specified by design
â
V
â
â
mV â
0.5
V
no external load
100 k⦠â
Data Sheet
20
Rev. 1.0, 2008-12-04
|
▷ |