English
Language : 

TLE4262 Datasheet, PDF (2/16 Pages) Siemens Semiconductor Group – 5-V Low Drop Voltage Regulator
TLE 4262
Dimensioning Information on External Components
The input capacitor CI is necessary for compensation of line influences. Using a resistor
of approx. 1 Ω in series with CI, the oscillating circuit consisting of input inductivity and
input capacitance can be damped. The output capacitor is necessary for the stability of
the regulating circuit. Stability is guaranteed at values ≥ 22 µF and an ESR of ≤ 3 Ω
within the operating temperature range. For small tolerances of the reset delay, the
spread of the capacitance of the dalay capacitor and its temperature coefficient should
be noted.
TLE 4262 G
INH 1
RO 2
N.C. 3
GND 4
GND 5
GND 6
GND 7
N.C. 8
D9
RADJ 10
20 Ι
19 N.C.
18 N.C.
17 GND
16 GND
15 GND
14 GND
13 N.C.
12 N.C.
11 Q
AEP01083
TLE 4262 GM
RO 1
N.C. 2
GND 3
GND 4
GND 5
D6
RADJ 7
14 INH
13 Ι
12 GND
11 GND
10 GND
9Q
8 N.C.
AEP02588
Figure 1 Pin Configuration (top view)
Data Sheet
2
Rev. 2.8, 2008-05-19