HYS64V8200GDL Datasheet, PDF (2/15 Pages) Infineon Technologies AG – 144 pin SO-DIMM SDRAM Modules

HYS64V8200GDL/HYS64V16220GDL
144 pin SO-DIMM SDRAM Modules
These INFINEON modules are industry standard 144 pin 8-byte Synchronous DRAM (SDRAM)
Small Outline Dual In-line Memory Modules (SO-DIMM) which are organised as 8Mx64 (64MByte)
and 16x64 (128MByte) high speed memory arrays designed for use in non-parity applications.
These SO-DIMMs use SDRAMs in TSOPII packages. Decoupling capacitors are mounted on the
board.
The DIMMs use serial presence detects implemented via a serial E²PROM using the two pin I²C
protocol. The first 128 bytes are utilized by the DIMM manufacturer and the second 128 bytes are
available to the end user.
All INFINEON 144-pin SO-DIMMs provide a high performance, flexible 8-byte interface in a 67,6
mm long footprint.
Product Spectrum:
Organisa-
tion
8M x 64
16M x 64
Partnumber
HYS64V8200GDL-7
HYS64V8200GDL-7.5
HYS64V8200GDL-8
HYS64V16220GDL-7
HYS64V16220GDL-7.5
HYS64V16220GDL-8
Speed
PC133-222
PC133-333
PC100-222
PC133-222
PC133-333
PC100-222
SDRAMs
used
4 8Mx16
8 8Mx16
Row Bank Column Refresh
Addr. Select Addr. Period
12 BA0, BA1 9
4k
64ms
Note: All partnumbers end with a place code (not shown), designating the die revision. Consult factory for current
revision. Example: HYS64V16220GDL-8-C2, indicating Rev.C2 dies are used for SDRAM components.
Card Dimensions:
Organisation
8M x 64
16M x 64
Partnumber
HYS64V8200GDL
HYS64V16220GDL
PCB-Board Layout
INTEL Rev. 1.0/1.2
INTEL Rev. 1.0/1.2
L x H x T [mm]
67.60 x 25.40 x 3.80
67.60 x 31.75 x 3.80
Pin Names
A0-A11
BA0,BA1
DQ0 - DQ63
RAS
CAS
WE
Address Inputs
Bank Selects
Data Input/Output
Row Address Strobe
Column Address
Strobe
Read / Write Input
DQMB0 - DQMB7
CS0, CS1 *)
Vcc
Vss
SCL
SDA
CKE0, CKE1 *)
Clock Enable
CLK0, CLK1
Clock Input
*) CS1 and CKE1 on two bank modules only
N.C.
Data Mask
Chip Select
Power (+3.3 Volt)
Ground
Clock for Presence
Detect
Serial Data Out for
Presence Detect
No Connection
INFINEON Technologies
2
9.01