FOA3251B1 Datasheet, PDF (2/25 Pages) Infineon Technologies AG – High Speed Clock and Data Recovery for Fiber Optic Applications

FOA3251B1
S1028C1
Revision History:
1999-08
Previous Version:
Page
Subjects (major changes since last revision)
Document’s layout has been changed: 2002-Sep.
V1.0
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see our webpage at http://www.infineon.com.
ABM^®, AOP^®, ARCOFI^®, ARCOFI^®-BA, ARCOFI^®-SP, DigiTape^®, EPIC^®-1, EPIC^®-S,
ELIC^®, FALC^®54, FALC^®56, FALC^®-E1, FALC^®-LH, IDEC^®, IOM^®, IOM^®-1, IOM^®-2, IPAT^®-2,
ISAC^®-P, ISAC^®-S, ISAC^®-S TE, ISAC^®-P TE, ITAC^®, IWE^®, MUSAC^®-A, OCTAT^®-P,
QUAT^®-S, SICAT^®, SICOFI^®, SICOFI^®-2, SICOFI^®-4, SICOFI^®-4µC, SLICOFI^® are
registered trademarks of Infineon Technologies AG.
ACE™, ASM™, ASP™, POTSWIRE™, QuadFALC™, SCOUT™ are trademarks of
Infineon Technologies AG.
Edition 1999-08
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
© Infineon Technologies AG 2002.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.