FOA3251B1 Datasheet, PDF (15/25 Pages) Infineon Technologies AG – High Speed Clock and Data Recovery for Fiber Optic Applications

FOA3251B1
S1028C1
Electrical Characteristics
Table 6
Electrical Characteristics (cont’d)
Parameter
Condition
Limit Values
Unit
min. typ.
max.
Output Rise/Fall Times
Clock Output
Rise Time
20% - 80%, 50 Ω
100
ps
Fall Time
20% - 80%, 50 Ω
100
ps
Data Output
Rise Time
Fall Time
Control and test inputs⁸⁾
Input logic High, V_ih
Input logic Low, V_il
Control and test outputs
Output logic High, V_ih
Output logic Low, V_il
Power Supply Voltage
Power Supply Current⁹⁾
Operating Temperature
Package Ambient
20% - 80%, 50 Ω
20% - 80%, 50 Ω
Referenced to V_CC
Referenced to V_CC
3
-40
120
ps
120
ps
0
V
-1
V
0
V
-1
V
5
5.8
V
210
mA
+85
°C
Bare Chip Ambient
Bare Chip Size
-40
+100 °C
< 3.0 mm x 3.0 mm
1) _{Min value Pin, Nin: VCC-Pin, Nin < 800 mV}
2) _{Voltage (Pin-Nin) = 4 mVpp @Pin = -23 dBm}
3) _{Hysteresis can be installed by a combination of Signal LOS and LLOS.}
4) _{Open Collector Output type, I = 2 mA. Datarate depends on output load.}
Termination with pullup resistor > 4.7 kΩ
5) _{No skipping clock cycles allowed down to < 10}-3 _BER
External adjustable.
6) _{Clock drift with no input 25 MHz}
7) _{The alarm shall be asserted before 500 ns of phase shift on the RX clock is realized.}
8) _{Consecutive identical bits 72 bits.}
9) _{Supply current = IEE ( current without ECL output current).}
Data Sheet
15
V1.0, 1999-08