TLE7250_15 Datasheet, PDF (19/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver

TLE7250LE
TLE7250SJ
Electrical Characteristics
Table 6 Electrical characteristics (cont’d)
4.5 V < V_CC < 5.5 V; R_L = 60 Ω; -40 °C < T_j < 150 °C; all voltages with respect to ground; positive current flowing
into pin; unless otherwise specified.
Parameter
Symbol
Values
Unit Note / Test Condition
Number
Min. Typ. Max.
Transmission Input TxD
“High” level input voltage
threshold
“Low” level input voltage
threshold
Pull-up resistance
Input hysteresis
Input capacitance
TxD permanent “dominant”
time-out
V_TxD,H
V_TxD,L
R_TxD
V_HYS(TxD)
C_TxD
t_TxD
–
0.3
× V_CC
10
–
–
4.5
0.5
× V_CC
0.4
× V_CC
25
450
–
–
0.7 V
× V_CC
–
V
50 kΩ
–
mV
10 pF
16 ms
“recessive” state;
“dominant” state;
–
1)
1)
normal-operating mode;
P_7.1.10
P_7.1.11
P_7.1.12
P_7.1.13
P_7.1.14
P_7.1.15
Not Enable Input NEN
“High” level input voltage
threshold
V_NEN,H
“Low” level input voltage
threshold
V_NEN,L
Pull-up resistance
R_NEN
Input capacitance
C_NEN
Input hysteresis
V_HYS(NEN)
Not Receive-only Input NRM
–
0.5 × 0.7 × V power-save mode;
V_CC V_CC
0.3 × 0.4 × –
V normal-operating mode,
V_CC V_CC
receive-only mode;
10 25 50 kΩ –
–
–
10
pF ¹⁾
–
200 –
mV ¹⁾
P_7.1.16
P_7.1.17
P_7.1.18
P_7.1.19
P_7.1.20
“High” level input voltage
threshold
“Low” level input voltage
threshold
Pull-up resistance
Input capacitance
Input hysteresis
Bus Receiver
Differential receiver
threshold “dominant”
normal-operating mode and
receive-only mode
Differential receiver
threshold “recessive”
normal-operating mode and
receive-only mode
V_NRM,H
V_NRM,L
R_NRM
C_NRM
V_NRM(HYS)
V_{Diff_D}
V_{Diff_R}
–
0.3 ×
V_CC
10
–
–
0.5 ×
V_CC
0.4 ×
V_CC
25
–
200
0.7 ×
V_CC
–
50
10
–
V normal-operating mode,
power-save mode;
V receive-only mode, power-
save mode;
kΩ –
pF ¹⁾
mV ¹⁾
P_7.1.21
P_7.1.22
P_7.1.23
P_7.1.24
P_7.1.25
–
0.75 0.9 V ²⁾
P_7.1.26
0.5 0.66 –
V
2)
P_7.1.27
Common mode range
CMR
-12 –
12 V V_CC = 5 V;
Differential receiver
V_Diff,hys
–
90 –
mV ¹⁾
hysteresis normal-operating
mode
P_7.1.28
P_7.1.29
CANH, CANL input
resistance
R_i
10 20 30 kΩ “recessive” state;
P_7.1.30
Data Sheet
19
Rev. 1.0, 2015-08-12