TLE7250_15 Datasheet, PDF (16/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver

6
General Product Characteristics
TLE7250LE
TLE7250SJ
General Product Characteristics
6.1
Absolute Maximum Ratings
Table 3 Absolute maximum ratings voltages, currents and temperatures¹⁾
All voltages with respect to ground; positive current flowing into pin;
(unless otherwise specified)
Parameter
Symbol
Min.
Values
Typ. Max.
Unit Note /
Test Condition
Number
Voltages
Transmitter supply voltage
V_CC
-0.3 –
CANH DC voltage versus GND V_CANH -40
–
CANL DC voltage versus GND V_CANL
-40
–
Differential voltage between
CANH and CANL
V_{CAN SDiff} -40
–
6.0
V–
40
V–
40
V–
40
V–
P_6.1.1
P_6.1.2
P_6.1.3
P_6.1.4
Voltages at the input pins:
NEN, NRM, TxD
V_{MAX_IN} -0.3
–
6.0
V–
P_6.1.5
Voltages at the output pin:
RxD
V_{MAX_OUT} -0.3
–
V_CC
V–
P_6.1.6
Currents
RxD output current
Temperatures
I_RxD
-20
–
20
mA –
P_6.1.7
Junction temperature
Storage temperature
ESD Resistivity
T_j
-40
–
150 °C –
T_S
-55
–
150 °C –
P_6.1.8
P_6.1.9
ESD immunity at CANH, CANL V_{ESD_HBM_} -9
–
9
versus GND
CAN
kV HBM
P_6.1.10
(100 pF via 1.5 kΩ)²⁾
ESD immunity at all other pins V_{ESD_HBM_} -2
–
ALL
ESD immunity to GND
V_{ESD_CDM} -750
–
1) Not subject to production test, specified by design
2
kV HBM
P_6.1.11
(100 pF via 1.5 kΩ)²⁾
750
V
CDM³⁾
P_6.1.12
2) ESD susceptibility, Human Body Model “HBM” according to ANSI/ESDA/JEDEC JS-001
3) ESD susceptibility, Charge Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability. Integrated protection functions
are designed to prevent IC destruction under fault conditions described in the data sheet. Fault conditions
are considered as “outside” normal-operating range. Protection functions are not designed for continuos
repetitive operation.
Data Sheet
16
Rev. 1.0, 2015-08-12