TLE7250X Datasheet, PDF (19/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver

7
Electrical Characteristics
TLE7250XLE
TLE7250XSJ
Electrical Characteristics
7.1
Functional Device Characteristics
Table 6 Electrical characteristics
4.5 V < V_CC < 5.5 V; 3.0 V < V_IO < 5.5 V; R_L = 60 Ω; -40 °C < T_j < 150 °C; all voltages with respect to ground;
positive current flowing into pin; unless otherwise specified.
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Current Consumption
Current consumption at V_CC
I_CC
normal-operating mode
Current consumption at V_CC
I_CC
normal-operating mode
Current consumption at V_IO
I_IO
normal-operating mode
–
2.6 4
mA “recessive” state,
P_7.1.1
V_TxD = V_IO, V_RM = 0 V;
–
38 60 mA “dominant” state,
P_7.1.2
V_TxD = V_RM = 0 V;
–
–
1
mA V_RM = 0 V;
P_7.1.3
Current consumption at V_CC
I_CC(ROM) –
–
2
mA V_RM = V_TxD = V_IO;
receive-only mode
P_7.1.4
Current consumption at V_IO
I_IO(ROM) –
–
1
mA V_RM = V_IO;
receive-only mode
P_7.1.5
Supply Resets
V_CC undervoltage monitor
rising edge
V_CC(UV,R) 3.8 4.0 4.3 V
–
P_7.1.6
V_CC undervoltage monitor
falling edge
V_CC undervoltage monitor
hysteresis
V_CC(UV,F) 3.65 3.85 4.3
V_CC(UV,H) –
150 –
V–
mV ¹⁾
P_7.1.26
P_7.1.7
V_IO undervoltage monitor
rising edge
V_IO(UV,R) 2.0 2.5 3.0 V
–
P_7.1.8
V_IO undervoltage monitor
falling edge
V_IO(UV,F) 1.8
V_IO undervoltage monitor
hysteresis
V_IO(UV,H) –
V_CC and V_IO undervoltage delay t_Delay(UV) –
time
2.3 3.0 V –
200 –
mV ¹⁾
–
100 µs ¹⁾ (see Figure 6 and
Figure 7);
P_7.1.27
P_7.1.9
P_7.1.10
Receiver Output RxD
“High” level output current
“Low” level output current
I_RD,H
–
I_RD,L
2
-4
-2
mA V_RxD = V_IO - 0.4 V,
V_Diff < 0.5 V;
P_7.1.11
4
–
mA V_RxD = 0.4 V, V_Diff > 0.9 V; P_7.1.12
Data Sheet
19
Rev. 1.0, 2015-08-12