ICE3A1065ELJ Datasheet, PDF (19/29 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS

CoolSET^®-F3
ICE3A1065ELJ
Electrical Characteristics
4 Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 8). The voltage levels are valid if other ratings are
not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction
of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7
(VCC) is discharged before assembling the application circuit.T_a=25°C unless otherwise specified.
Parameter
Symbol
Limit Values Unit Remarks
min. max.
Drain Source Voltage
V_DS
Pulse drain current, t_p limited by max. I_{D_Puls}
T_j=150°C
Avalanche energy, repetitive t_AR limited E_AR
by max. T_j=150°C¹⁾
Avalanche current, repetitive t_AR limited I_AR
by max. T_j=150°C
VCC Supply Voltage
V_VCC
FB Voltage
V_FB
BL Voltage
V_FB
CS Voltage
V_CS
Junction Temperature
T_j
Storage Temperature
T_S
Thermal Resistance
Junction -Ambient
R_thJA
-
650
V
T_j=110°C
-
3.4
A
-
0.07 mJ
-
1.0
A
-0.3
27
V
-0.3
5.5
V
-0.3
5.5
V
-0.3
5.5
V
-40
150
°C
Controller & CoolMOS^®
-55
150
°C
-
90
K/W PG-DIP-8
Soldering temperature, wavesoldering T_sold
only allowed at leads
-
260
°C
1.6mm (0.063in.) from case
for 10s
ESD Capability (incl. Drain Pin)
V_ESD
-
2²⁾
kV
Human body model³⁾
1) _{Repetitive avalanche causes additional power losses that can be calculated as PAV=EAR*f}
2) _{2KV is for all pin combinations except VCC to GND is 1KV}
3) _{According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5kΩ series resistor)}
Version 2.1
19
12 May 2009