1ED020I12-BT Datasheet, PDF (19/34 Pages) Infineon Technologies AG – Single IGBT Driver IC

EiceDRIVER™
1ED020I12-BT
Electrical ParametersOperating Parameters
4)Output IC power dissipation is derated linearly at 10 mW/°C above 62°C. Input IC power dissipation does not
require derating. See Figure 17 for reference layouts for these thermal data. Thermal performance may change
significantly with layout and heat dissipation of components in close proximity.
5) According to EIA/JESD22-A114-B (discharging a 100 pF capacitor through a 1.5 kΩ series resistor).
5.2
Operating Parameters
Note: Within the operating range the IC operates as described in the functional description. Unless otherwise
noted all parameters refer to GND1.
Table 3 Operating Parameters
Parameter
Symbol
Values
Min.
Max.
Positive power supply output side
V_VCC2
13
20
Negative power supply output side
V_VEE2
-12
0
Maximum power supply voltage output side V_max2
–
28
(V_VCC2 - V_VEE2)
Positive power supply input side
V_VCC1
4.5
5.5
Logic input voltages
(IN+,IN-,RST)
V_LogicIN
-0.3
5.5
Pin CLAMP voltage
V_CLAMP
V_VEE2-0.3 V_VCC22)
Pin DESAT voltage
V_DESAT
-0.3
V_VCC2
Pin TLSET voltage
V_TLSET
-0.3
V_VCC2
Ambient temperature
Common mode transient immunity³⁾
1) With respect to GND2.
T_A
-40
105
|DV_ISO/dt| –
50
2) May be exceeded during short circuit clamping.
3) The parameter is not subject to production test - verified by design/characterization
Unit
V
V
V
V
V
V
V
V
°C
kV/μs
Note /
Test Condition
1)
1)
–
–
–
–
1)
1)
–
@ 500 V
5.3
Recommended Operating Parameters
Note: Unless otherwise noted all parameters refer to GND1.
Table 4 Recommended Operating Parameters
Parameter
Symbol
Positive power supply output side
Negative power supply output side
Positive power supply input side
1) With respect to GND2.
V_VCC2
V_VEE2
V_VCC1
Value
15
-8
5
Unit
V
V
V
Note / Test Condition
1)
1)
–
Final Data Sheet
19
Rev 2.0, 2012-07-31