TLE6209R_07 Datasheet, PDF (17/30 Pages) Infineon Technologies AG – 7 A H-Bridge for DC-Motor Applications

TLE 6209 R
3.3
Electrical Characteristics (cont’d)
8 V < V_S < 40 V; 4.75 V < V_CC < 5.25 V; INH = High; all outputs open;
– 40 °C < T_j < 150 °C; unless otherwise specified
Parameter
Symbol Limit Values Unit Test Conditions
min. typ. max.
High-Side Switch Overcurrent
High-side shutdown
threshold
I_SDH
8
12 18 A –
Shutdown delay time
t_dSD
15 25 40 µs –
Short circuit current
I_SC
–
–
25 A during t_dSD
Note: For short circuit current definition, see Figure 5. Short circuit current is
guaranteed by design
Leakage Current / Output Current in Tristate
Source-Output-Stage
Sink-Output-Stage
I_QLH
– 120 – 50 –
I_QLL
–
0.5 1
µA V_OUT = 0 V
mA V_OUT = V_S
Output Delay Times (device not in stand-by for t > 1 ms)
High-side ON
High-side OFF
Low-side ON
Low-side OFF
t_{d ON H}
–
t_{d OFF H} –
t_{d ON L}
–
t_{d OFF L} –
4
10 µs V_S = 13.2 V,
0.6 1
µs ^{Resistive load of}
12 Ω
2
3.5 µs
2.5 4
µs
Output Switching Times (device not in stand-by for t > 1 ms)
High-side switch rise time t_{RISE H} –
1.8 3.5 µs
High-side switch fall time t_{FALL H} –
0.2 0.8 µs
Low-side switch rise time t_{RISE L} 2
6.5 11 µs
Low-side switch fall time t_{FALL L} 2
4.3 6.5 µs
Note: For switching time definitions, see Figure 6.
V_S = 13.2 V,
Resistive load of
12 Ω
Data Sheet, Version 3.1
17
2007-08-01