1ED020I12FTA_16 Datasheet, PDF (15/31 Pages) Infineon Technologies AG – Single IGBT Driver IC

1ED020I12FTA
Single IGBT Driver IC
Electrical Parameters
3) With respect to VEE2.
4) Output IC power dissipation is derated linearly at 8.5 mW/°C above 68°C. Input IC power dissipation does not require
derating. See Figure 9-1 for reference layouts for these thermal data. Thermal performance may change significantly
with layout and heat dissipation of components in close proximity.
5) According to EIA/JESD22-A114-B (discharging a 100 pF capacitor through a 1.5 kΩ series resistor).
5.2
Operating Parameters
Note: Within the operating range the IC operates as described in the functional description. Unless otherwise
noted all parameters refer to GND1.
Table 5-2 Operating Parameters
Parameter
Symbol
Values
Unit
Min.
Max.
Positive power supply output side
V_VCC2
13
20
V
Negative power supply output side
V_VEE2
-12
0
V
Maximum power supply voltage output side V_max2
–
(V_VCC2 - V_VEE2)
28
V
Positive power supply input side
V_VCC1
4.5
5.5
V
Logic input voltages
(IN+,IN-,RST)
V_LogicIN
-0.3
5.5
V
Pin CLAMP voltage
V_CLAMP
V_VEE2-0.3 V_VCC22)
V
Pin DESAT voltage
V_DESAT
-0.3
V_VCC2
V
Pin TLSET voltage
V_TLSET
-0.3
V_VCC2
V
Ambient temperature
Common mode transient immunity³⁾
1) With respect to GND2.
T_A
-40
|DV_ISO/dt| –
125
°C
50
kV/μs
2) May be exceeded during short circuit clamping.
3) The parameter is not subject to production test - verified by design/characterization
Note
1)
1)
–
–
–
–
1)
1)
–
@ 500 V
5.3
Recommended Operating Parameters
Note: Unless otherwise noted all parameters refer to GND1.
Table 5-3 Recommended Operating Parameters
Parameter
Symbol Value Unit
Positive power supply output side
Negative power supply output side
Positive power supply input side
1) With respect to GND2.
V_VCC2
15
V
V_VEE2
-8
V
V_VCC1
5
V
Note
1)
1)
–
Data Sheet
15
Rev. 3.0
2016-04-05